ET | LT | EN | RU | DE
  • For developing self-contained circulation systems for heating floors or radiator heating, modules consisting of pump&mixing sets and manifold blocks are employed.

    The pump&mixing sets are designed for forced circulation, and for the adjustment and maintenance of the set heat carrier temperature in heating systems. Manifold blocks are used to distribute the flow of transported fluid to customers. They allow the flow for each circulation circuit to be adjusted and controlled separately.

    The efficiency of a heating system based on a manifold block with pump&mixing set is due to the multiple circulation principle whereby the heat carrier circulates between the supply and return manifold with partial takeoff and feeding up of thermal energy from the high temperature heat source of the primary circuit. This principle allows the temperature of the heat carrier in the secondary circuits to be significantly reduced, saving 10-20% of thermal energy.
Kollektorgrupp kulumõõturite ja reguleerpidemega termostaatklappidega
Article Size Packing A B Weight,g Price*
PF MB 800.2 1"x¾"M (2) 4/1 100 210 1616 53,84
PF MB 800.3 1"x¾"M (3) 4/1 150 210 2500 71,87
PF MB 800.4 1"x¾"M (4) 4/1 200 210 3175 105,23
PF MB 800.5 1"x¾"M (5) 4/1 250 210 3820 128,32
PF MB 800.6 1"x¾"M (6) 4/1 300 210 4485 152,25
PF MB 800.7 1"x¾"M (7) 4/1 350 210 5160 176,69
PF MB 800.8 1"x¾"M (8) 2/1 400 210 5895 200,17
PF MB 800.9 1"x¾"M (9) 2/1 450 210 6503 227,31
PF MB 800.10 1"x¾"M (10) 2/1 500 210 6956 258,5
PF MB 800.11 1"x¾"M (11) 2/1 550 210 7600 285,66
PF MB 800.12 1"x¾"M (12) 2/1 600 210 8244 312,76
PF MB 801.2 1¼"x¾"M (2) 2/1 100 210 2022 -
PF MB 801.3 1¼"x¾"M (3) 2/1 150 210 2662 -
PF MB 801.4 1¼"x¾"M (4) 2/1 200 210 3406 -
PF MB 801.5 1¼"x¾"M (5) 2/1 250 210 4142 -
PF MB 801.6 1¼"x¾"M (6) 2/1 300 210 4630 -
PF MB 801.7 1¼"x¾"M (7) 2/1 350 210 5600 -
PF MB 801.8 1¼"x¾"M (8) 2/1 400 210 6391 -
PF MB 801.9 1¼"x¾"M (9) 2/1 450 210 7059 -
PF MB 801.10 1¼"x¾"M (10) 2/1 500 210 7592 -
PF MB 801.11 1¼"x¾"M (11) 2/1 550 210 8236 -
PF MB 801.12 1¼"x¾"M (12) 2/1 600 210 8938 -

Rated pressure: PN 6 bar
Operating medium temperature: -20°С +80°С
Distance between outlet axes: 50mm
Manifold material: nickel-plated brass CW617N DIN EN 12165

Kollektorgrupp kulumõõturite ja reguleerpidemega termostaatklappidega, äravoolukraanide ja õhueralditega
Article Size Packing A B Weight,g Price*
PF MB 802.2 1"x¾"M (2) 4/1 150 210 2894 76,67
PF MB 802.3 1"x¾"M (3) 4/1 200 210 3425 103,86
PF MB 802.4 1"x¾"M (4) 4/1 250 210 4110 125,72
PF MB 802.5 1"x¾"M (5) 4/1 300 210 4809 147,5
PF MB 802.6 1"x¾"M (6) 4/1 350 210 5230 179,17
PF MB 802.7 1"x¾"M (7) 2/1 400 210 6120 197,76
PF MB 802.8 1"x¾"M (8) 2/1 450 210 6750 223,85
PF MB 802.9 1"x¾"M (9) 2/1 500 210 7410 246,34
PF MB 802.10 1"x¾"M (10) 2/1 550 210 8010 273,58
PF MB 802.11 1"x¾"M (11) 2/1 600 210 8610 301,04
PF MB 802.12 1"x¾"M (12) 2/1 650 210 9230 327,81
PF MB 803.2 1¼"x¾"M (2) 2/1 150 210 3012 -
PF MB 803.3 1¼"x¾"M (3) 2/1 200 210 3652 -
PF MB 803.4 1¼"x¾"M (4) 2/1 250 210 4395 -
PF MB 803.5 1¼"x¾"M (5) 2/1 300 210 5132 -
PF MB 803.6 1¼"x¾"M (6) 2/1 350 210 5620 -
PF MB 803.7 1¼"x¾"M (7) 2/1 400 210 6590 -
PF MB 803.8 1¼"x¾"M (8) 2/1 450 210 7381 -
PF MB 803.9 1¼"x¾"M (9) 2/1 500 210 8049 -
PF MB 803.10 1¼"x¾"M (10) 2/1 550 210 8581 -
PF MB 803.11 1¼"x¾"M (11) 2/1 600 210 9226 -
PF MB 803.12 1¼"x¾"M (12) 2/1 650 210 9928 -

Rated pressure: PN 6 bar
Operating medium temperature: -20°С +80°С
Distance between outlet axes: 50mm
Manifold material: nickel-plated brass CW617N DIN EN 12165

* Price in EUR include VAT
  • 1
  • 2
Заголовок модального окна modal_about
Promotional Materials
Declaration of conformity
Certificate
3D model
Technical Passport
Заголовок модального окна 3D_view
Design features
  • 1W-handle / L-handleAl/Steel S235JR
    2GlandTeflon PTFE
    3Gland nutBrass CW614N
    4Stem inserted from insideBrass CW614N
    5Chrome plated ballBrass CW614N
    6Ball seat sealTeflon PTFE
    7Reinforced valve bodyBrass CW617N
    Main technical specifications
    Diameter nominal (DN), mmDN15 – DN50
    Connection thread G½" – 2"
    Nominal pressure PN, bar20 – 40
    Temperature of working medium, °C–20° +150°
    Gate leakage class«А»
    Mean lifetime, cycles30 000
    Average service life, years30
    Notches on the outer thread improve the grip with sealing material during installation.
    Soft PVC coating of the tap handle with a color marking.
    A sealing opening in the handle base.
    A new label design showing the product’s name and the main technical specifications.
  • 1W-handle / L-handleAl/Steel S235JR
    2Lock nut SST AISI 304
    3Gland nutBrass CW614N
    4GlandTeflon PTFE
    5Stem inserted from insideBrass CW614N
    6Chrome plated ballBrass CW614N
    7Ball seat sealTeflon PTFE
    8Reinforced valve bodyBrass CW617N
    Main technical specifications
    Diameter nominal (DN), mmDN15 – DN50
    Connection thread G½" – 2"
    Nominal pressure PN, bar25 – 64
    Temperature of working medium, °C–30° +150°
    Gate leakage class«А»
    Mean lifetime, cycles40 000
    Average service life, years40
    For a better grip with sealing materials during installation, notches are provided on the outer connection thread of the taps.
    A self-locking stainless nut prevents the tap handle from loosening. The handle features a special sealing port.
    The taps are provided with two colored silicone caps to label hot and cold tapwater.
  • PROFACTOR® STRONG —
    Power and performance in every part of the tap!
    ORIGINAL STRONG®
    An O-ring is placed deep inside the casing resulting in increased wall thickness in the area impacted by the tap`s main overhang load.
    BULL NECK®
    Increased thickness of the rod column ensures its maximum strength. The rod`s leak-tightness is ensured by a Teflon gland with a compression bushing.
    Increased wall thickness in the threading area ensures higher resistance to mechanical loads during tap installation and operation.
  • 1W-handle / L-handleNickel-plated steel
    2GlandTeflon PTFE
    3Gland nutBrass CW614N
    4Stem inserted from insideBrass CW614N
    5Chrome plated ballBrass CW614N
    6Ball seat sealTeflon PTFE
    7Reinforced valve bodyBrass CW617N
    Main technical specifications
    Diameter nominal (DN), mmDN15 – DN50
    Connection thread G½" – 2"
    Nominal pressure PN, bar20 – 40
    Temperature of working medium, °C–20° +130°
    Gate leakage class«А»
    Mean lifetime, cycles30 000
    Average service life, years30
    PROFACTOR® TREND — is a guarantee
    of the best price and high quality
  • 1HandwheelSteel S235JR
    2Valve stemBrass CW617N
    3Gland nutBrass CW614N
    4Metal-to-metal wedgeBrass CW617N
    5GlandTeflon PTFE
    6Reinforced valve bodyBrass CW617N
    Main technical specifications
    Diameter nominal (DN), mmDN15 – DN25
    Connection thread G½" – 1"
    Nominal pressure PN, bar16
    Temperature of working medium, °C–20° +200°
    Gate leakage class«А»
    Average service life, years30
  • 1Aluminum handleAl alloy
    2Stem O-ringsRubber NBR
    3Ball seat sealTeflon PTFE
    4Stem inserted from insideBrass CW614N
    5Chrome plated ballBrass CW614N
    6Threaded bushBrass CW614N
    7Chrome plated bodyBrass CW614N
    THREE-WAY TAPS FOR AUTOMATIC WASHING MACHINES

    A classic three-way tap model for automatic washing machines is part of the most demanded category of market products used when connecting domestic appliances to water supply systems.

    The design’s simplicity and reliability are qualities that make this tap stand apart from competitors in the range of valves used for connecting plumbing equipment. Profactor Armaturen GmbH represents the most durable taps of this type. An additional advantage is the metal handle in the design of the product, which ensures its durability throughout its service life.

    This tap is installed at the pipeline as an intermediate component and has a closable branch for connecting to a domestic appliance with a connection size of ¾". A high-quality chromium coating improves the aesthetic properties of the tap and allows it to be installed in visible places.

  • 1Chrome plated handleZn alloy
    2Threaded bushBrass CW617N
    3Valve bodyBrass CW617N
    4Gate sealRubber NBR
    5Stem O-ringsRubber NBR
    6Stem with built-in ball gateBrass CW617N
    7Rear coverSST AISI 304
    ANGLE CHROMIUM-PLATED TAP

    The Profactor® angled chromium-plated tap is intended for shutting off water flow between the pipeline and plumbing terminal devices (a mixer tap, shower cabin, toilet bowl, etc.) The working assembly of the tap is a rod featuring a rotary and closing mechanism that ensures the absolute reliability of flow shutoff.

    The angled shutoff tap is recommended for installation upstream of each terminal device. The exterior is another important characteristic of this item. A high-quality chromium coating allows it to be installed not only in concealed areas, where the plumbing fixtures are usually installed, but in visible places as well. The metal handle included in the design of the Profactor® angled tap ensures reliable usage throughout its service life.

    Installation and operation of this type of tap ensures safety in case of prolonged absence of the user from a residential house or a flat.

  • 1W-handle / L-handleAl/Steel S235JR
    2Lock nutSST AISI 304
    3Stem O-ringsFluororubber (FPM)
    4Stem inserted from insideBrass CW614N
    5Chrome plated ballBrass CW614N
    6Ball seat sealTeflon PTFE
    7Reinforced valve bodyBrass CW617N
    Main technical specifications
    Diameter nominal (DN), mmDN15 – DN50
    Connection thread G½" – 2"
    Nominal pressure PN, barMOP 5
    Temperature of working medium, °C–20° +60°
    Gate leakage class«А»
    Mean lifetime, cycles12 000
    Average service life, years30
    To ensure a better grip with the sealing material during installation, the tap’s outer thread features notches.
    A handle is attached to the rod via a self-locking stainless nut and has a special sealing port.
    The road leak-tightness is ensured by two Viton® DuPont™ FPM O-rings.
© 2017-2023 — Profactor Baltic